[其他]
九巴招標供應及安裝電動巴士充電器,並提供相關服務
[複製鏈接]
|
本帖最後由 s20141095 於 2021-7-5 15:39 編輯
http://www.kmb.hk/chi/pdf/2021EOI162.pdf
刊登日期:5-7-2021
招標編號:EOI/1162
截標日期:14-7-2021
九龍巴士(1933)有限公司(“九巴”)特此公開邀請就以下招標表達興趣。就本意向書而言,九巴代表載通國際控股有限公司(“Transport International Holdings Limited”)和 TIH 的聯屬公司行事。
九巴尋找優質承辦商為純電動巴士(「電動巴士」)供應及安裝直流(DC)充電設施,包括:
1.充電櫃
2.監督控制和數據採集(“SCADA”)
並提供其他(“充電設施”)相關服務,完全符合香港的所有立法要求。
有相關資源、資歷和經驗來填寫資料,並以PDF附件形式透過電子郵件發送以下項目:
1.商業登記證副本和公司註冊證副本
2.投標書收集資料表(隨附空白表),請妥善填寫與簽署公司印章
3.部署具有類似規範要求的電動車輛充電設施的相關項目參考,詳見附於本 OTN 的項目簡介。
項目簡介
供應和安裝電動巴士直流充電設施
1.經營條件
a.預計使用壽命不少於18年
2.工程範圍
a.設計、供應和安裝充電設施
b.執行安裝工作
c.進行檢查和調試
3.充電櫃
a.描述:額定三相交流輸入電壓
目標:380V+-6% & 50Hz+-2%
b.描述:充電櫃輸入電流
目標:≤400A
c.描述:充電櫃輸出功率
目標:100kW x 2 耦合器 = 200kW
d.描述:工作方式應為長期滿負荷連續工作
目標:遵守
e.描述:總諧波電流失真
目標:< 12%
f.描述:功率因數
目標:> 0.85 滯後
g.描述:充電櫃的構造應符合國際防護等級
目標:IP54 或更高
h.描述:所需的最低效率
目標:> 90%
i.描述:連接器接口應為 CCS Combo 2
目標:遵守
4.監控系統
a.提供數據記錄和報告操作信息
b.允許多個用戶(不少於 10 個)同時進入系統
c.HMI/SCADA 系統應具有報警通知功能,可實時傳遞報警信息
The Kowloon Motor Bus Company (1933) Limited (“KMB”) hereby openly invites Expression of Interest for the below subject. For the purpose of this EOI, KMB is acting on and behalf of Transport International Holdings Limited (“TIH”) and TIH’s affiliate company(ies).
Issue Date:5 July 2021EOI Reference:EOI/1162
Subject Supply Scope:
KMB intends to appoint quality contractor(s) to supply and install Direct Current Charging Facilities for Battery Electric Buses (“EV Bus”), including
Charging Cabinet
Supervisory Control and Data Acquisition (“SCADA”)
and provide other related services, fully comply with all legislative requirements in Hong Kong. (“Charging Facilities”)
EOI Submission Deadline:
14 Jul 2021 (10:00 am, Hong Kong Time)
By email to: tender.brown@kmb.hk
In case a rainstorm black warning or typhoon signal No. 8 or above is valid for any duration between 9:00 a.m. (HKSAR Time) and 12:00 noon (HKSAR Time), the closing time will be extended to 12:00 noon (HKSAR Time) on the next weekday (i.e. except Saturday and Sunday) other than public holiday.
Prequalification Requirement:
All interested parties having relevant resources, qualifications and experience shall complete and return the following items by email as PDF attachment:
1) Copy of Business Registration and Company Incorporation Certificate
2) EOI Registration Form (blank form is attached), duly completed and signed with company chop
3) Relevant project reference(s) for the deployment of electric vehicle charging facilities with similar specification requirements detailed in the Project Brief attached to this OTN.
Enquiry:Should you have any queries, please contact below contact person: Contact: Mr Ivan Au (Tel. 2786 8035)
Project Brief
Supply and install DC Charging Facilities for EV Bus
1. Operating Conditions
a) Expected service life of not less than 18 years
2. Scope of Works
a) Design, supply and install the Charging Facilities.
b) Perform installation works
c) Perform inspection and commissioning
3. Charging Cabinet Description KMB Target
a) Rated 3-phase AC input voltage 380Vz+-6%,50Hz+-2%
b) Input current of charging cabinet ≦400A
c) Output power from charging cabinet 100kW x 2 Couplers = 200kW
d) Working mode shall be long-term full load successive working Comply
e) Total harmonic current distortion < 12%
f) Power factor > 0.85 lagging
g) The charging cabinet shall be constructed to conform International Protection Rating IP54 or higher
h) Minimum efficiency required > 90%
i) The connector interface shall be CCS Combo 2 Comply
4. SCADA a) Provide data-logging recording and reporting the operations information b) Multiple users (not less than 10) are allowed to enter the system simultaneously c) HMI/SCADA system shall have alarm notification function that delivers realtime alarm information
|
|
|
|
|
|
Advertisement
Advertisement
Advertisement
Advertisement
Advertisement
|